SET UP: Instructions 


            Important: set up Man Power + Manager in a directory named sym22 
        It is not a good idea to set up two program's in the same directory.
    Therefore if you have your Symphony program set up in c:\sym22 rename it
    to Symphony. 

         If you have met the above criteria for installation, lets go!
    Place disk numbered 1 in (A) drive at the dos prompt, A:\ (type)
    install?  (?  = The drive letter you wish to use) then Press Enter.
    Here is an example if want to install on c:\ then at the A:\ Prompt
    (Type) installc, Press Enter sends to C:\sym22.  A:\installd = send to
    D:\sym22. 

         To start the Program, start Symphony, Press the F9 KEY Press the
    letter C then F then escape key.  Type C:\SYM22 change C to your drive
    letter.  Press enter 
    Now press A for auto load, escape Type menu1.wr1 press enter type U then 
    Q. To start Program F9 F R menu.wr1 then enter.  Or to auto load exit
    at this time.  Load Symphony: when you restart Man Power + Manager will
    be on screen.  Your best bet is to press (G) first, for program
    instruction 
       

                 -------------READ THOROUGHLY -------------


                         Bill "The Conductor" Liatti 
                                818-914-3187